ROOK F508 group Wireless Flash Trigger for NIKON with 3 Receivers

(This SET include 1 Transmitter and 3 Receivers)

Extra receivers if you need:

PIXEL ROOK F508RX Wireless Flash Receiver for NIKON

Introduction

The ROOK professional flash trigger can work as flashgun trigger, studio light trigger, Transmitter's hot shoe support TTL flash,and can sync the receiver to trigger the flash on it. and work with extra shutter remote cord, it can remote control the camera, just like the wireless remote shutter release, support half-press focusing and full-press take the picture. The flash sync speed is up to 1/320s. The shutter control support long time exposure.(BULB mode)

Transmitter has a 3.5mm input socket witch can connect with your camera’s PC sync port. in this case, you can keep on use your hot shoe and trigger the other flashes.
Receiver has a 3.5mm output socket. It can be use to connect your camera’s shutter remote port(Need extra shutter connect cable), or connect the studio flash via attached 3.5mm to 3.5mm sync cord, or connect with the flash via PC sync cord (need to purchase extra 3.5mm to PC sync cable).


ROOK is using global free channel 2.4GHz and FSK modulation system to make the performance more stable, and work in bigger distance. Particular saving power design can make the transmitter and receiver battery last more time.

Features

1, Using global free 2.4GHz channel and FSK modulation system, and there's 4 selectable frequency channels.  

2,Transmitter's hot shoe support TTL flash,and can sync the receiver to trigger the flash on it.  

3,Receiver can be divided to 3 groups. Control difference flash group through transmitter setting, which totally 7 types combination. 

4,Support multi receiver as the same group.

5,Flash sync speed Max to 1/320s.  

6,(The sync speed will be different for Various combination of camera and flash )  

7,  Support the TTL flashgun wake-up function; you'll never miss any shot opportunity.   

8，Fire the flashgun through hot shoe part and fire the studio light through 3.5mm to 3.5mm(or 3.5mm to 6.35mm) cable.  

9，Supports to control multiple flashguns and studio lights at same time.   

10, Shutter remote control function available and you can remote control different camera through changing shutter remote cable    11,  Supports to control multiple cameras to take shots at the same time.  

12，Operating distance is more than 200 meters.  

13，Ultra-low standby power consumption; transmitter standby time is more than 5 years, and receiver standby time up to 250 hours.  

14，  Low voltage design, it's able to use rechargeable batteries.  

15，Power supply use 2*AAA batteries.(transmitter and receiver)

Specification:

1.Wireless flash trigger mode:


Transmitter compatible camera:

Transmitter compatible flash:

Receiver compatible flash:

NOTE:
Compatible with other brands flash (Wake up can only used in TTL Compatible flash)

2.Wireless Flash trigger via 3.5-PC Sync cord :
(NOTE: this mode can not support 1/320sec sync, max to 1/200sec.)
(NOTE: This mode will lose Flash wake up function.)
(The 3.5-PC sync cable to be purchased separately)

3.Wireless Remote Control mode:

Master camera control the slave camera

 
Receiver Compatible with the device under shutter release mode:

4.Receiver Wired Remote Control mode:

5.Wireless studio light trigger mode:

 Package Included:
 ROOK Transmitter x1
 ROOK Receiver x 3
 AAA alkaline battery x8
 3.5mm to Nikon DC0 shutter remote cable x1
 3.5mm to Nikon DC2 shutter remote cable x1
 3.5mm to 3.5mm studio flash cable x3
 3.5mm to 6.35mm studio flash cable x3
 Receiver holding mount x3(The holding mount is for studio lamp. It has double tape sticker)
 Receiver Hot shoe protection cover x4
 English User Manual x1
(Original Manufactory Package)