GGS Sensor loupe is an ideal accessory of observing and cleaning the sensor.
1. Unique modes: Observing mode and Cleaning mode.
Observing mode magnification: 5X, Can see the dirt on the sensor very clearly withour flare.
Cleaning mode magnification: 3X, Can see the situation of cleaning with full view to achieve the complete cleaning.
GGS Sensor loupe stand can be set up on the hot shoe of DSLR,convenient for cleaning.
4. LED torch.
5. Power of 2pcs AAA battery.
How to use:
1) Choose dust removal as per camera manual instruction.
2) Locate the GGS Sensor loupe in the lens position.
3) Turn on the power,inspect the surface and room of CCD/CMOS through the loupe.
1) Make sure the energy is enough.Open CCD with dust removal setting as per camera manual instruction.
2) Set up the stand on the hot shoe,and put the sensor loupe afterwards.
3) Press the observing button on the sensor loupe and lens is ejected,open the light.
4) Monitor the process of cleaning through loupe.
1. Make sure the camera electricity is enough,in case of the power failure damages the reflector and sensor.
2. Please do as per camera manual instruction,open CCD with dust removal setting,do not use Bulb setting.
Sensor Loupe KIT x1 (Original Manufactory Package)